IMC Networks 9820, 9830 Specifications, Standards/Compliance, Fiber Optic Cleaning Guidelines

Page 9

Specifications

Input Specifications

 

AC Wall Adapter

100 to 240 ±10% VAC input, 5 VDC output, 2A max.

DC terminal

+7 VDC to +50 VDC @ 2.5 watts. Actual current

 

consumption may vary depending on the type of SFP

 

modules installed. When not using the supplied AC/DC

 

converter the externally supplied DC power must be

 

provided from a LPS source

DC jack Double-USB Power Cable

5 VDC Spec 500mA

Please note that the laptop or PC USB ports must be 2.0 or greater to provide sufficient power to the unit.

Power Tray 18-Slot AC

125W, 20A@ 5V

for Miniature Converters

 

Operating Temperature:

 

-13°F to +185°F (-25°C to +85°C) DC configuration

-4°F to +158°F (-20°C to +70°C) DIN Railmount power supply +14°F to +122°F (-10°C to +50°C) with AC wall adapter

Storage Temperature:

-49°F to +185°F (-45°C to +85°C)

Shipping Weight: 0.25 lbs (0.11 kg)

Dimensions:

0.83” H x 1.80” W x 3.35” D (2.11 x 4.57 x 8.51 cm)

Standards/Compliance

SFP-MSA SFP standard (September 14, 2000)

SFF-8472 DDMI standard (Revision 1.0)

All SFPs used in this product should be certified to IEC 60825-1.

Fiber Optic Cleaning Guidelines

Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, which can obstruct the optic path and cause performance degradation. Good system performance requires clean optics and connector ferrules.

6

Image 9
Contents IE-ModeConverter FCC Radio Frequency Interference Statement WarrantyTable of Contents Features About IE-ModeConverterApplications Installing the IE-ModeConverter SFP Port RequirementsDIN Rail Mounting DC Terminal Block Option Powering the IE-ModeConverterLED Operation Cascading DC PowerIMC Networks Technical Support DC Power Supply PrecautionsSpecifications Fiber Optic Cleaning GuidelinesStandards/Compliance Electrostatic Discharge Precautions Safety Certifications Document Number 55-80619-00 A4