Operating Your DVD Standard
On/Off/Stand-by
Note
COMPATIBLE DISCS
How to Play a Disc
Notes
This section provides information about operating the DVD Standard.
After the DVD Standard is connected to the video monitor and other system components, it is ready for operation.
1.Insert the AC power cord into the IEC power connector (37) on the DVD Standard. Insert the other end into the AC wall recepta- cle. The red
2.Press the power button (1) or key (38) The blue power LED (2) on the front panel illuminates. The DVD Standard is in the opera- tional mode. The disc transport is active.
3.To return to the
Krell recommends leaving the DVD Standard in the
The DVD Standard can play the following discs:
DVD 12CM single- or
DVD 8CM single- or
Video CD 12CM
Video CD 8CM
1.Press the open/close button (13) or key (56) to open the disc transport (14).
2.Place the disc on the transport.
3.Press the open/close button or key again to close the disc transport.
4.Playback begins from the first track.
5.Press the stop button (7) or key (57) to end disc playback.
Adjust the volume level through your system volume control.
See Front Panel Description, on page 11, and How to Write a Program, on page 27, for more information on disc playback options.
26 | Krell DVD Standard |