Button Functions
Code Entry using the Code List
POWER Turns product On or Off.
Red Indicator Lights when any button is pressed.
SETUP Used to setup the remote, and for code search function.
TV, CBL/AUX, VCR/DVD
Selects product to be operated.
CHANNEL Up/Down Changes the channels. Also controls DVD SKIP functions.
MUTE Turns off the TV sound, while the picture remains.
VOLUME UP/DOWN Changes the volume level of the product, normally the TV.
RECORD, PLAY, STOP, REW, FF, PAUSE VCR/DVD control buttons operate your VCR or DVD even when the remote is set to operate the TV.
1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3.Enter the 4 digit code for your brand of TV, VCR, etc., from the Library Code Table by using the Rewind, Play, and Fast Forward buttons.
Use the REW button to enter the first digit.
Use the Play button to enter second digit.
Use the FF button to enter the third digit.
For Example: To enter code 013, don’t press REW, press Play once, and FF three times. The red LED blinks off with each keypress.
Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.
4
4. Press the Stop button to save the code.
Note: for a valid code, the red LED turns off. For an invalid code, the red LED blinks rapidly for three seconds before going off.
5.With your device on, press POWER. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.
5