Setting up using Code Search
If you cannot find a 4 digit code in the Code Table that operates your TV, try searching for the code as follows:
1.Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and quickly release the desired device button (TV, VCR, etc.). The red indicator blinks off once.
4. Press the POWER button repeatedly (up to 300 times) until the device to be controlled turns off. The red indicator blinks off with each button press.
5.Press and release STOP to install the code.
Write your codes down here for easy reference later.
Device | Device stored | Code |
|
|
|
TV | TV |
|
CBL/AUX |
|
|
VCR/DVD |
|
|
6
Using Your Remote
Code Retrieval
Code Retrieval lets you identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below:
1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Press and release the SETUP button. The red indicator blinks once and remains lit.
4.To find the first digit for the code stored under the device button pressed in step 2, press REW and count the number of blinks.
5.To find the second digit, press Play and count the number of blinks.
6.To find the third digit, press FF and count the number of blinks.
7