Jasco RM24927, RM94927 instruction manual Cable BOX Code List, Programming For Cable

Programming For Cable

1. Manually turn on the Cable Box.

Find the three digit code for your Cable Box in the code list below.

2.Press and hold the CODE SEARCH but- ton until the INDICA- TOR LIGHT lights, then release the CODE SEARCH button.

3.Press and release the CBL button (The

INDICATOR LIGHT will blink then remain lit.

4.Enter the code using the Number Buttons. After your code is entered, the

INDICATOR LIGHT will turn off. If the code is not valid, the

INDICATOR LIGHT will blink. Check the code list and repeat process.

5.Aim the remote at your CABLE and press the ON•OFF button.

Your CABLE should turn off.

CODE

SEARCH

INDICATOR

			LIGHT
	CABLE
			(BLINK)
1	2	3
4	5	6
7	8	9	(OFF)
	0
		ON•OFF

CHAN +

CABLE BOX CODE

6.With your Cable Box on, press CHAN+ (CHANNEL UP). If the Cable Box responds, no further programming is required.

NOTE: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method.

7. Enter your code here for easy reference.

CABLE BOX CODE LIST

9