Programming For AUX 1 or AUX 2 Buttons
With the AUX 1 and AUX 2 buttons, you can assign a second TV, DVD, CD player, VCR, Satellite System, or Cable Box to it.
1.Manually turn on the device you wish to con trol. Find the three digit code for the device you wish to program in the code list at the back of the instructions.
2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3.Press and release the AUX 1 or AUX 2 button (The INDICATOR LIGHT will blink then remain lit.)
4.Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at the device you wish to con trol and press the ON•OFF button. The device should turn
off.
6.With your device
on, press CHAN+ (CHANNEL UP) but ton. If the device responds, no further programming is required.
CODE
SEARCH
INDICATOR
|
|
| LIGHT |
| AUX |
|
|
|
|
| (BLINK) |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | (OFF) |
| 0 |
|
|
ON•OFF
CHAN + ON•OFF
OR
AUX1CODE
TV VCR CABLE DBS
CD RCVR LD DVD
AUX2CODEE
TV VCR CABLE DBS
CD RCVR LD DVD
NOTE: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 12.
7.Enter your code and the type of device you programmed here for easy reference.
12