Trouble Shooting
Pr oblem
Indicator Light not blinking when you press any key
Solution
A)Replace the batteries (with fresh, new AAA Alkaline batteries).
B)Check that batteries are properly installed.
The RM94905 does not operate your device
Not performing com- mands properly
Problems program- ming a TV/VCR Combo Unit
VCR not recording
A)Try all the codes listed for your brand.
B)Try the Code Search method (page 11).
Start Code Search over again to locate the proper code.
Try the VCR code for your brand. Some combo units, however, may require both a TV and a VCR code for full operation.
As a safety feature on your remote, you must press the REC button twice.
Channel up and down do not function on an
RCA TV
Problems changing channels
Due to some designs, the original remote will only per - form these functions.
If your original remote required ENTER after a chan- nel, press ENTER after you select a
channel.
No response after pressing a key
A)Make sure you have new batteries, and you are aiming your remote at your devices.
B)Check that batteries are properly installed. See page 3.
12