Programming For VCR

1.Manually turn on the VCR.

2.Press and hold the SETUP button until the

INDICATOR LIGHT lights, then release the SETUP button.

3.Press and release the VCR button (the

INDICATOR LIGHT will blink then remain lit).

4.Find the three digit code for your VCR in the code list in the back of this book and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.

5.Aim the remote at your VCR and press the POWER button.Your VCR should turn off.

BLINK

OFF

Note: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.

6.With your VCR on, press CHANNEL UP. If theVCR responds, no further programming is required.

7. Enter your code	VCR CODE
here for easy
reference.