Using Your Remote, cont.
Controlling Devices with Separate Power On and Off Buttons
Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the POWER button to turn the device off.
Controlling Combo Devices
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up two different Mode buttons to control both parts of the Combo device. For example, if you have a TV/DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part.
VCR/DVD Punch-Through
This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC) to
10
Using Your Remote, cont.
Volume/Mute Control and Punch- Through
This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will
Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing.
Setting ALL Volume/Mute Control to any one Mode
This routine can set all Modes to
1. | Press and hold the SETUP button until | SETUP |
| the red indicator turns on, then release |
|
| the button. |
|
2. | Press and hold the MUTE button until |
|
| the red indicator blinks off, then release |
|
| the button. |
|
3. | Press and release the desired Mode button |
|
| (TV, VCR, etc.) for Volume/Mute control, |
|
| the red indicator blinks then stays on. |
|
4. | Press and release the MUTE button and |
|
| the red indicator turns off. The red |
|
| indicator will blink rapidly for three |
|
| seconds if the Mode you have selected |
|
| has no Volume/Mute control. |
|
All other Modes will now
11