Jasco RM94931 Volume/Mute Control Punch-Through, Setting ALL Volume/Mute Control to any one Mode

Using Your Remote, cont.

Volume/Mute Control and

Punch-Through

This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode.

Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that

Mode.

1.Press and hold the SETUP button until the red indicator turns on, then release

SETUP

	the button.	MUTE
2.	Press and hold the MUTE button until the
	red indicator blinks off, then release the
3.	button.
	Press and release the desired Mode button	TV
	(TV, VCR, etc.) for Volume/Mute control,
	the red indicator blinks then stays on.
4.	Press and release the MUTE button	MUTE
	and the red indicator turns off. The
	red indicator will blink rapidly for three
	seconds if the Mode you have selected
	has no Volume/Mute control. All other
	Modes will now punch-through to your
	chosen Mode for Volume/Mute control.

11