Using Your Remote
Code Identification
The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below:
1.Press and hold the SETUP button until the red indicator stays on. Release the SETUP button.
2.Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3.Press and release the SETUP button. The red indicator blinks once and remains lit.
4.To find the first digit for the code stored
under the device | 1 | 2 | |
button pressed in step |
|
| |
2, press each numeric | 4 | 5 | |
button from | |||
|
| ||
turn. The number that | 7 | 8 | |
causes the indicator |
light to blink is the first digit in your code.
5. To find the second digit, repeat step 4.
SETUP
TV
SETUP
3
6
9
6.Repeat step 4 to find the third and fourth digit.
This time the red indicator turns off and stays off.