ProgrammingYourAudio&VideoDevices
Most GE, RCA and ProScan devices will not require programming. Check to see if your device responds to the remote before you begin programming.
1.Manually turn on the device to be pro- grammed. Find the three digit code for your device in the code list.
2.Press and hold the SETUP button until the
INDICATOR LIGHT lights, then release the SETUP button.
3.Press and release the device button. The
INDICATOR LIGHT will blink then remain lit.
4.Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at your device and press the ON•OFF button. Your device should turn off.
6.With your device
on, press CH+ (CHANNEL UP). If the TV responds, no fur- ther programming is required.
NOTE: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code
Search method on Page 7.
7.Enter your device code here for easy reference.