RCA F27450, F32444, F32450, F36444, F36450 manual Tv + Vcr

Connections & Setup

TV (back panel)
VIDEO	R-AUDIO-L		INPUT2
Y	PB	PR
V
T			INPUT1
VIDEO R-AUDIO-L
AUDIO
OUT	R	L

CABLE/ ANTENNA

1A

VCR

G-LINK1B

3 VCR 1C

VIDEO	AUDIO
OUT
R	L
IN
R	L

S-VIDEO

IN FROM ANT

CH3

CH4

OUT TO TV

2

From Cable or Antenna

TV + VCR

1. Connect your TV to your VCR

A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).

B. Connect the audio/video cables. Connect audio cables (white and red) to the INPUT1 AUDIO R and L jacks on the back of the TV and to the Audio Output Jacks on the VCR (sometimes labeled OUT R L).

C. Connect the video cable (yellow) to the INPUT1 VIDEO jack on the back of the TV and to the Video Output Jack on the VCR.

2.Connect cable or antenna to your VCR

Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).

3.Connect the G-LINK cable to the TV

If you haven’t already done so, remove the Demo Pin from the G-LINK jack. Then, connect the G-LINK cable to the G-LINK jack on the TV. Next step, place one of the wands of the G-LINK cable to work with your VCR (instructions are on page 14).

Go to page 14

12 Chapter 1