RCA F27443 manual Jacks on the Back of the TV

Connections & Setup

Jacks on the Back of the TV

This section describes each of the jacks on the back of the TV. When connecting A/V cables, be sure to connect corresponding outputs to inputs (video to video, right audio to right audio, etc.)

G-LINKConnect the end of the G-LINK cable (provided) to this jack. The G-LINK cable enables the TV’s GUIDE Plus+ system to interact with the cable box and/or the VCR. A picture of the G-LINK cable is on page 7.

CABLE/ANTENNA Lets you connect a coaxial cable to receive the signal from the antenna, cable or cable box.

Y PB PR

VIDEO R-AUDIO-L

Input Jacks Let you connect a component such as a VCR, DVD player, satellite receiver or laserdisc player.

•VIDEO provides composite video connection. The video connector is usually yellow.

•R AUDIO provides right audio connection. The right audio connector is usually red.

•L AUDIO provides left audio connection. The left audio connector is usually white.

•S-VIDEO provides better picture quality than the regular video jack because the color part of the signal is separated from the black and white part of the picture. When using S-Video, make sure to connect left and right audio cables to the R-AUDIO-L Input jacks.

•Y, PB, PR (Component Video) provides optimum picture quality because the video is separated into three signals. Use three video-grade cables for the

connection. When using Y, PB, PR, make sure to connect left and right audio cables to the R-AUDIO-L Input jacks.

Chapter 1 13