Connections & Setup
Step 1: Identifying Your TV’s Location
1.If your country is highlighted, press OK on the remote control.
If your country isn’t highlighted, press the up or down arrow button on the remote control to highlight your country and press OK.
2.Use the number buttons on your remote to enter your zip code.
Press OK when you’re finished.
Note: If your postal code contains letters, press the up and down arrow buttons on your remote to enter letters, and press the right arrow button to go to the next space. The left arrow button moves you to the left.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup. To supply your TV with the correct TV program listings, the GUIDE Plus+ system needs to know if your TV is connected to cable.
1.If your TV is connected to cable, highlight Yes and press OK.
If your TV isn’t connected to cable, highlight No and press OK (STEP 3: Configuring for a VCR appears). Go to page 19.
2.If you have a cable box connected to this TV, highlight Yes and press OK on your remote control.
Note: The next series of screens is very important because the GUIDE Plus+ system must find the correct cable box information in order to receive the correct TV program listings.
If you don’t have a cable box connected to this TV, highlight No and press OK (STEP 3: Configuring for a VCR appears). Go to page 19.
Tip
If you’re not sure which channel is the cable box’s output channel, consult the book that came with your cable box or contact your cable company.
Chapter 1 | 17 |