Panasonic SRP1103/27 user manual Resetting a button to its original function

5 sec.

4
+ VOL -	adjusts TV volume.
.................................	previous program / Last /
	Back.
+ CH.................................-	mutes TV sound.
	next / previous channel.
5
5	rewind.
2	play.
6	fast forward.
9	stop.
0	record.
;	pause.
4P 3P	previous (4P) / next
	(3P) page / track in
	various modes.
/	set your Thumb ratings.
6	digit buttons for direct
	channel / track selection.
................................	used after direct channel
	selection. Some devices
	require	to be
	pressed after channel
	selection.

...........................selects between one

and two-figure channel numbers.

3.2Resetting a button to its original function

If an improved button (see chapter 2.2.2) still does not function as expected, you can always reset the button to its original function.

1 In the current device mode, keep digit buttons

and pressed simultaneously for 5

seconds, until the

red Setup light lights up.

•The remote control is now in setup mode.

2	Press digit buttons
	,	and	, in
	that order.
	•	After each
		button press
		the red Setup
3		light blinks once.
	Press the button
	that you wish to
	reset twice. E.g. the
	22 button.		2 x
	•	After each

button press

the red Setup light blinks once.

•The red Setup light will blink one more time to confirm that the button was succesfully reset to its original function.

Using the universal remote control English

10 EN EN 11