Panasonic CZ-RWSU1U, CZ-RWSK1U Using the Remote Controller, For Best Results, Wall Mount Use

Page 17

9. USING THE REMOTE CONTROLLER

•Point the transmitter of the remote controller at the receiver. When the signal is received correctly it will beep once. (It beeps twice only when the unit starts operating.)

•The signal can be received at a distance of about 19 ft. This distance should be used only as a guide. It depends on battery strength.

•Make sure nothing is between the remote controller and the receiver that could block the signal.

•Do not leave the remote controller in direct sunlight, where the wind from the air conditioner can blow directly on it, or near any other heat source.

•Take care not to drop, throw or wash the remote controller with water.

•The signal from the remote controller may not be received in rooms with rapid start fl uorescent lighting, inverter lights, plasma displays, LCD televisions (monitor), etc. For more information, please contact the dealer where the product was purchased.

Wall Mount Use

•Press from the location you wish to mount the remote controller and make sure the signal is received correctly.

•Pull the remote controller forward to remove it.

Fasten the Remote

Fitting the Remote

Controller mount

Controller in the

with screws.

mount.

2Press

1Put in

Remote Controller mount

10. FOR BEST RESULTS

Don’t get the remote controller too far away from the receiver.

This may cause a malfunction.

Be sure to keep the remote controller in the same room as the receiver.

Point the remote controller at the receiver.

When the signal is received correctly it will beep one time.

Avoid locating the remote controller where it is covered, such as behind a curtain.

Keep it out in the open.

15

Instruction_eng.indd 15

2012/01/27 16:25:34

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operating Instructions Wireless Remote Control System Contents Installation Precautions Important Safety InstructionsNames and Operations Remote ControllerRemote Controller Receiver Names and OperationsCZ-RWSU1U CZ-RWSC1U CZ-RWST1U CZ-RWSY1U Indoor Unit CZ-RWSK1U Remove the cover Insert two AAA alkaline batteries Installing BatteriesPressing completes the time setting Setting the Current TimePress for two seconds or more Set the hour with /Operation Press one of the buttons and set the desired temperatureAuto , Heat , Dry , Cool , Fan Stop PressDry Operation Auto OperationUsing the Timer Timer OperationChecking the timer setting Timer Operation Combining on and OFF TimersChanging a timer setting Canceling a timer settingSetting the Wind Direction Adjusting the Wind DirectionSetting Flap to Swing Stopping Flap SwingOperating Multiple Outdoor Units Simultaneously Adjusting the Wind DirectionPoint the remote controller at the receiver Using the Remote ControllerFor Best Results Wall Mount UseAddresses When you release , the address that was displayed is setChecking Addresses Matching up AddressesCZ-RWSU1U Addresses Start press Emergency Operation of the receiver Emergency OperationCZ-RWSU1U/CZ-RWST1U/CZ-RWSY1U/Indoor Unit CZ-RWSK1U Press Emergency Operation of the receiver Emergency OperationStop press Emergency Operation of the receiver again How to Operate Miscellaneous SettingsBefore requesting service, please check the followings Before Requesting ServiceCZ-RWSU1U/CZ-RWST1U/CZ-RWSC1U/CZ-RWSY1U/CZ-RWSK1U SpecificationsDC0911-20112
Related manuals
Manual 2 pages 20.32 Kb Manual 1 pages 50.4 Kb

CZ-RWSC1U, CZ-RWSY1U, CZ-RWST1U, CZ-RWSU1U, CZ-RWSU2U specifications

The Panasonic CZ-RWSU2U is an advanced remote controller designed for use with Panasonic air conditioning systems, revolutionizing the way users interact with their climate control. This device offers a range of features and technologies aimed at providing enhanced comfort, convenience, and energy efficiency.

One of the primary features of the CZ-RWSU2U is its user-friendly interface, which is designed to be intuitive and easy to navigate. The controller typically includes a large display that provides clear information on temperature settings, operational modes, and system status. This allows users to quickly adjust their air conditioning settings to suit their preferences without any hassle.

In terms of connectivity, the CZ-RWSU2U is equipped with advanced wireless technology, allowing it to communicate seamlessly with compatible Panasonic indoor units. This capability enables users to operate their air conditioning systems remotely through the Panasonic app, giving them greater control over their home’s climate even when they are away. This feature is particularly beneficial for those looking to pre-cool or pre-heat their homes based on their schedule.

The CZ-RWSU2U also includes energy-saving functions, such as timers and scheduling options that allow users to set their air conditioning system to operate only when needed. This functionality can significantly reduce energy consumption and lead to lower utility bills.

An important aspect of the CZ-RWSU2U is its compatibility with a variety of Panasonic air conditioning models. This versatility makes it an excellent addition for homeowners who may upgrade their systems over time. Furthermore, the device supports multiple indoor units, allowing users to control different zones within their homes.

Incorporating advanced sensor technology, the CZ-RWSU2U can detect variations in indoor climate and optimize performance accordingly. The controller can adjust settings automatically based on the room temperature and humidity levels, ensuring a comfortable environment at all times.

Overall, the Panasonic CZ-RWSU2U remote controller stands out as a sophisticated and versatile solution for efficiently managing air conditioning systems. Its innovative features, such as user-friendly operation, wireless connectivity, energy-saving options, and compatibility with multiple indoor units, make it an essential tool for modern comfort and convenience in any home.
Top Page Image Contents