Panasonic CZ-RWSC1U Installing Batteries, Remove the cover Insert two AAA alkaline batteries

Page 9

3. INSTALLING BATTERIES

1.Remove the cover.

2.Insert two AAA alkaline batteries.

Put the batteries in with the polarity [+/–] as shown in the fi gure.

3.Gently insert one end of an unfolded paper clip (or a similar object that can fit) into the Reset hole and press the reset button inside the hole and then put the cover back on.

Note

•Change the batteries when the display of the remote controller gets weak or if it will not work unless close to the receiver. (Alkaline batteries generally last about one year.)

•When changing batteries, always use two fresh batteries of the same make.

•If the remote controller will not be used for a long period of time, remove the batteries.

•Please dispose of batteries appropriately.

•After changing the batteries, follow the procedures on the next page to reset the current time.

Reset hole

Cover

HOW TO REMOVE BATTERIES

1.Remove the cover.

2.Press the battery toward the negative end and

lift it out by its positive end. (As shown at right)

3. Remove the other battery in the same way.

Note

•Dispose of the used batteries at the designated location in compliance with the applicable local ordinances.

Warning

•Do not swallow the battery.

•After removing the battery from remote controller, keep it away from the reach of children. The battery can cause death by suffocation if swallowed.

•When inserting the battery, make sure the polarities (+ and -) are correct.

7

Instruction_eng.indd 7

2012/01/27 16:25:32

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions Wireless Remote Control System Contents Installation Precautions Important Safety InstructionsNames and Operations Remote ControllerRemote Controller Receiver Names and OperationsCZ-RWSU1U CZ-RWSC1U CZ-RWST1U CZ-RWSY1U Indoor Unit CZ-RWSK1U Remove the cover Insert two AAA alkaline batteries Installing BatteriesPressing completes the time setting Setting the Current TimePress for two seconds or more Set the hour with /Operation Press one of the buttons and set the desired temperatureAuto , Heat , Dry , Cool , Fan Stop PressDry Operation Auto OperationUsing the Timer Timer OperationChecking the timer setting Timer Operation Combining on and OFF TimersChanging a timer setting Canceling a timer settingSetting the Wind Direction Adjusting the Wind DirectionSetting Flap to Swing Stopping Flap SwingOperating Multiple Outdoor Units Simultaneously Adjusting the Wind DirectionPoint the remote controller at the receiver Using the Remote ControllerFor Best Results Wall Mount UseAddresses When you release , the address that was displayed is setChecking Addresses Matching up AddressesCZ-RWSU1U Addresses Emergency Operation CZ-RWSU1U/CZ-RWST1U/CZ-RWSY1U/Indoor Unit CZ-RWSK1UStart press Emergency Operation of the receiver Emergency Operation Stop press Emergency Operation of the receiver againPress Emergency Operation of the receiver How to Operate Miscellaneous SettingsBefore requesting service, please check the followings Before Requesting ServiceCZ-RWSU1U/CZ-RWST1U/CZ-RWSC1U/CZ-RWSY1U/CZ-RWSK1U SpecificationsDC0911-20112
Related manuals
Manual 2 pages 20.32 Kb Manual 1 pages 50.4 Kb

CZ-RWSC1U, CZ-RWSY1U, CZ-RWST1U, CZ-RWSU1U, CZ-RWSU2U specifications

The Panasonic CZ-RWSU2U is an advanced remote controller designed for use with Panasonic air conditioning systems, revolutionizing the way users interact with their climate control. This device offers a range of features and technologies aimed at providing enhanced comfort, convenience, and energy efficiency.

One of the primary features of the CZ-RWSU2U is its user-friendly interface, which is designed to be intuitive and easy to navigate. The controller typically includes a large display that provides clear information on temperature settings, operational modes, and system status. This allows users to quickly adjust their air conditioning settings to suit their preferences without any hassle.

In terms of connectivity, the CZ-RWSU2U is equipped with advanced wireless technology, allowing it to communicate seamlessly with compatible Panasonic indoor units. This capability enables users to operate their air conditioning systems remotely through the Panasonic app, giving them greater control over their home’s climate even when they are away. This feature is particularly beneficial for those looking to pre-cool or pre-heat their homes based on their schedule.

The CZ-RWSU2U also includes energy-saving functions, such as timers and scheduling options that allow users to set their air conditioning system to operate only when needed. This functionality can significantly reduce energy consumption and lead to lower utility bills.

An important aspect of the CZ-RWSU2U is its compatibility with a variety of Panasonic air conditioning models. This versatility makes it an excellent addition for homeowners who may upgrade their systems over time. Furthermore, the device supports multiple indoor units, allowing users to control different zones within their homes.

Incorporating advanced sensor technology, the CZ-RWSU2U can detect variations in indoor climate and optimize performance accordingly. The controller can adjust settings automatically based on the room temperature and humidity levels, ensuring a comfortable environment at all times.

Overall, the Panasonic CZ-RWSU2U remote controller stands out as a sophisticated and versatile solution for efficiently managing air conditioning systems. Its innovative features, such as user-friendly operation, wireless connectivity, energy-saving options, and compatibility with multiple indoor units, make it an essential tool for modern comfort and convenience in any home.
Top Page Image Contents