Clarion AX430 Nomenclature, Precautions, Names of Buttons, Source Unit / 主機, Display / 顯示屏

2. CONTROLS／控制鍵

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

注意︰閱讀各章時務請展開此頁並參照前視圖。

SOURCE UNIT / 主機

[RELEASE] [ROTARY]		Cassette Insertion Slot		[ISR]
[A-M]		盒帶插入槽	[Q]
	[FNC]

[s]	[BND]	[DISP]
[a][d]		[RDM]
	[Z-EHCR]	[DIRECT]
		[RPT]
		[SCN]

DISPLAY / 顯示屏

3. NOMENCLATURE

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3 (unfold).

Names of Buttons

[RELEASE] button

[ROTARY] knob

[A-M] button

•Loudness button

[FNC] button

•Power button

[Q] button

[ISR] button

[DISP] button

[RDM] button

[RPT] button

•Blank Skip button

[SCN] button

•Preset Scan/Auto Store button

[DIRECT] buttons (1 to 6)

[Z-EHCR] button

[BND] button

•Program button

•Magazine button

[ ], [ ] buttons

[ s ] button

•Mute button

4. PRECAUTIONS

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

1.Tape slack can lead to operating difficulties. Remove tape slack before inserting a cassette, particularly when using C-90 or prerecorded cassettes.

2.Use C-30 to C-90 cassettes. Avoid use of C- 120 or longer cassettes (The very thin tape may stretch or break).

3.Clean the head periodically with a good com- mercial head cleaner. Avoid touching the head with magnetic or hard objects.

4.Do not oil the cassette mechanism.

5.Always remove the cassette from the mecha- nism when not in use. Exposure to direct sun- light, extreme temperatures or high humidity may damage cassettes.

6.The cassette tape will automatically eject from the mechanism if it is damaged. Always en- sure that cassette tapes are in good condition prior to use.

INFORMATION FOR USERS:.

CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANU- FACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.

3 AX430 4 AX430