KV-HF21M80
5-4. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS
Note:
•All capacitors are in ∝ F unless otherwise noted.
•All electrolytic capacitors are rated at 50V unless otherwise noted.
•All resistors are in ohms.
kΩ = 1000Ω , MΩ = 1000kΩ
•Indication of resistance which does not have rating electrical power is as follows.
Pitch: 5 mm
| Rating electrical power 1/4W (CHIP: 1/10W) |
• | : nonflammable resistor. |
•¢ : internal component.
• : panel designation or adjustment for repair.
•All variable and adjustable resistors have characteristic curve B unless otherwise noted.
•Readings are taken with a
( | ) | : SECAM |
[ | ] | : NTSC 3.58 |
« » : NTSC 4.43
•Readings are taken with a 10 MΩ digital multimeter.
•Voltage are dc with respect to ground unless otherwise noted.
•Voltage variations may be noted due to normal production tolerances.
•All voltages are in V.
•* : Cannot be measured.
•Circled numbers are waveform references.
• |
|
|
|
|
|
|
| : B + bus. |
• |
|
|
|
|
|
|
| : B – bus. |
• |
|
|
|
|
|
|
| : signal path. |
Reference information |
| |
RESISTOR | : RN | METAL FILM |
| : RC | SOLID |
| : FPRD | NONFLAMMABLE CARBON |
| : FUSE | NONFLAMMABLE FUSIBLE |
| : RS | NONFLAMMABLE METAL OXIDE |
| : RB | NONFLAMMABLE CEMENT |
| : RW | NONFLAMMABLE WIREWOUND |
| : ∗ | ADJUSTMENT RESISTOR |
COIL | : | MICRO INDUCTOR |
CAPACITOR | : TA | TANTALUM |
| : PS | STYROL |
| : PP | POLYPROPYLENE |
| : PT | MYLAR |
| : MPS | METALIZED POLYESTER |
| : MPP | METALIZED POLYPROPYLENE |
| : ALB | BIPOLAR |
| : ALT | HIGH TEMPERATURE |
| : ALR | HIGH RIPPLE |
Note: The component identified by shading and mark ! are critical for safety. Replace only with part number specified.
– 43 –