To exit the "Slide Show"
Press ~ on the remote.
To change still images and movies in "Slide Show" manually
1Press MEMORY STICK to display the "Memory Stick Home".
2Move ~ up or down to select "Slide Show", then press~. The "Slide Show" menu appears.
3Move ~ up or down to select"Advance", then press ~.
4Move ~ up or down to select "Manual", then press~.
5Move ~ up or down to select "Start", then press~.
If you move ~ right, the next still image or movie appears; if you move ~ left, the previous still image or movie appears.
To change the slide advance interval
You can selecta time interval with which still images or movies change, from among "5 sec", "10 sec", "3D sec", "I min", "5 min" and "10 min". The factory setting is "5 sec".
The interval can be changed when"Advance" in the "Slide Show" menu is set to "Auto".
1Press MEMORY STICK to display the "Memory Stick Home".
2Move ~ up or down to select "Slide Show", then press~. The "Slide Show" menu appears.
3Move ~ up or down to select "Interval", then press~.
4Move ~ up or down to select the interval you want to set, then
press~.
5Move ~ up or down to select "Start", then press~. The "Slide Show" starts.
To start the "Slide Show" from the specified still image or movie
1Press MEMORY STICK to display the "Memory Stick Home".
2Move ~ up or down to select the still image or movie from which you want to start the "Slide Show", then press~.
The "Memory Stick Home" (index menu) appears.
3Move (0) up or down to select "Slide Show", then press~.
continued