Sony KV-T29SN81 service manual Picture Tube Removal, ∙ Removal of ANODE-CAP ∙ Removing Procedures

2-7. PICTURE TUBE REMOVAL

NOTE : The picture tube for this model is upside-down and the position for the anode-cap and tension spring is changed accordingly

3 F1 board

4 C board

5 VM board

6 Deflection yoke

2 A board

7Four screws (Tapping screws)

1 Anode cap

– 13 –

Cushion

∙REMOVAL OF ANODE-CAP

NOTE : After removing the anode, short circuit the anode of the picture tube and the an- ode cap to the metal chassis, CRT shield or carbon paint on the CRT.

∙REMOVING PROCEDURES

a

a

b

b

2Using a thumb press down then pull up the rubber cap firmly in the direction indicated by the arrow b.

c

Anode Button

3When one side of the rubber cap is separated from the anode button, the anode-

cap can be removed by turning up the rubber cap and pulling it up in the direc- tion of the arrow c.

∙HOW TO HANDLE AN ANODE-CAP

1Do not damage the surface of anode-caps with sharp shaped objects.

2Do not press the rubber too hard so as not to damage the inside of anode-caps. A metal fitting called the shatter-hook terminal is built into the rubber.

3Do not turn the foot of rubber over too hard.

The shatter-hook terminal will stick out or damage the rubber.

1Turn up one side of the rubber cap in the direction indicated by the arrow a.

KV-T29SN81RM-870