PYLE Audio PLDVD10M manual Selecting the FM frequency of FM modulator, Inserting the Batteries

Page 9

32.PLAY: Press one time to play DVD function.

33.>>I: Forward to next chapter

34.>>: Press next to skip to the next track

35.BOOKMARK: Memory play

36.A-B: Repeat play segment. Press once to set

37.FORMAT: Switch video output PAL/NTSC.

38.TITLE: Display the TITLE menu that is stored in the DVD disc.

39.DVD/TV/Monitor: Switch DVD /TV/ modulator button.

40.MENU: Enter to menu playback.

41.MODE: Switch video input AV1/AV2

Selecting the FM frequency of FM modulator

1.4 LED lamps indicate 4 applicable transmitting frequencies outputs: 87.7MHz / 87.9MHz/

88.3MHz / 88.7MHz

2. The red LED lamp is power on indicator

3. Select the applicable transmitting frequency by the select button respectively from 87.7MHz / 87.9MHz / 88.3MHz / 88.7MHz

4.Adjust the receiving FM frequency on radio and attain the best reception according to the

corresponding frequency

Inserting the Batteries

1.Open the battery compartment cover.

2.Insert the new batteries. Make sure that the positive and negative terminals of the batteries are properly followed.

3.Close the cover Battery: two AAA size batteries.

8

Image 9
Contents TFT-LCD Monitor Built-in DVD/CD/MP3 Player Table of Contents Welcome While driving PrecautionsInstallation Monitor Section DVD Section Operate DVD by Remote Control Inserting the Batteries Selecting the FM frequency of FM modulatorConnection Diagram Using the Remote ControlSymptom Reason Solution Trouble ShootingAccessories Specification