Installation

●Place the mounting bar on the poles of headrest and then tighten 4 long screws until the mounting bar is fastening firmly to the headrest poles.

●Put the adapter on the face of L type mounting stand and screw it tightly.

●Slide the engagement nut into the slide bracket slot on the rear of the monitor housing.

●Slide the engagement head on the monitor into the adapter of L-type mounting stand and tighten firmly.

●Insert the L type mounting stand on the monitor into the mounting

bar and screw tight until the monitor is securely fastened to the Mounting stand.

●Squeeze the clamp of engagement head and pull up to release monitor from bracket.