Buttons on the Remote Control | RCA 20F510TD specification

The Remote Control

MUTEPOWER

TV DVD

INPUTRECALL

	CH
VOL	MENU		VOL
	CH
	SLEEP		MTS/SAP
		REPEAT
DISPLAY PICTURE			AUDIO
TITLE	SKIP	ANGLE	AUDIO
SUBTITLE
		OK
GUIDE
PBC	INFO		ZOOM

Arrow buttons for the TV Menu System

The Buttons on the Remote Control

INPUT Press it to switch between AV/DVD input and RF (antenna) input.

TV Press to place the remote control in TV mode.

MUTE Press to reduce the volume level. Press again to restore the volume.

DISPLAY Press to display channel information

PICTURE Press to display the picture preset.

SLEEP Press to set the sleep timer.

RECALL Press to return to the previous channel. If the unit is in menu mode, press the RECALL button to the return previous menu screen.

POWER Press to turn the TV on or off.

VOL (left and right) buttons Press to increase or decrease the TV volume.

CH (up and down) buttons Scans up or down through the current channel list. Press once to change the channel up or down, press and hold to continuously channels. If your TV is in standby mode, press these buttons to turn the TV on. In AV mode, press these buttons to switch to TV mode.

MENU Displays the TV’s Main menu (see page 7 for details).

0-9 (Number buttons) Press these buttons to select channels and to set the time directly. Press 0-9 to select a channel. For example, to select channel 10, press 1 and 0, the channel changes. If you press 0 first, when you press the second number, the channel changes at once. For example, to select channel 8, press 0 and then 8, the channel changes immediately.

AUDIO Choose from four preset audio settings (MEMORY, STANDARD, NEWS or MUSIC).

MTS/SAP This button is not available for this model.

Other buttons: Buttons other than the ones listed above, are not available for TV functions.