Powering Your Camcorder(continued)
_:i_!:i!_i:zii!¸_i!i_!iiii_:_:_i:
Rechargeable Battery
The battery must be charged before it can be used the first time. Initial charging will take approximately one hour. When fully charged, the battery should supply about
Place the ON/POWER SAVE lever in POWER SAVE during recording breaks to conserve power. Place it back in ON when you are ready to resume recording.
Refresh and Charge the Battery
The nickel cadmium battery will provide longer operation time if it is refreshed (completely discharged) before every charging. Refreshing a
battery will take approximately
Use the small marker switch on the top of the battery to help you remember to recharge the battery. It has no other function.
Marker
Switch
REFRESH Button
CHARGE
Indicator
POWER Indicator
To AC 100-240V, 50/60 Hz
Caution: When a battery:is attach_ to the adapter/charger;"do not t_ them: upside down: The battery
1.If the DC power cord's plug is connected to the adapter/charger, remove it.
2.Plug the adapter/charger into the nearest AC outlet
3.Align the reference marks on the battery and adapter/charger.
4.Hold the battery flush against the adapter/charger, and slide it in the direction of the arrow until it
locks into place. The CHARGE indicator will light.
5.Press the REFRESH button to discharge the battery. After a few seconds, the CHARGE
indicator will flash slowly. It will stop flashing when the battery has been discharged. The CHARGE indicator will light and the battery will automatically recharge.
Note: If the CHARGE indicator starts flashing rapidly, remove the battery from the adapter/charger and try attaching it again.
. Slide the charged battery off the adapter/charger to remove it. Unplug the AC power cord.
Important | Note: |
|
|
|
Spent | rechargeable | battery must | ] | |
be recycled | or disposed | of properly | in compliance | / |
with all applicable laws. |
|
| [ | |
For detailed | information, contact your local county | / | ||
solid waste | authority. |
|
| [ |
17