RCA B27TF685 Using Block Repeat, You can choose to have your, Block repeat from one to ten times

16061510-CHAPTER 4 12/13/02 11:48 AM Page 65

VCR O P E R AT I O N

Using Block Repeat

Block repeat allows you to repeat a section of tape that you select. You can repeat this section of tape (the “block”) from one to ten times, or endlessly.

1					VCR Setup		▼	You can choose to have your
							“block” repeat from one to ten times,
Press the MENU button.		Timer Record			￿		or endlessly.
Press the DOWN arrow		Program Review			￿
	CH	True Repeat			:	Off
button to select the VCR		Block Repeat			:	10
Setup icon, then press the
RIGHT arrow button.
	￿￿Move		￿￿	Sel.	Exit
2					VCR Setup
Press the DOWN arrow
button to select “Block		Timer Record			￿
Repeat”, then press the		Program Review			￿	Off
RIGHT arrow button to	CH	True Repeat			:
		Block Repeat			:	10
select the number of times
you want your “block” to
repeat.	￿￿Move			Sel.	Exit
			￿￿
Press the MENU button to
return to normal viewing.
3
Insert and play a
pre-recorded video
cassette tape.
4							▼	“Repeat” section should be set up
							at a minimum five-second interval.
Press the REPEAT button
at the beginning of the
“block” you want to
repeat.
5							▼	The word “Repeat” will appear on
							the screen.

When you reach the end of the “block,” press the REPEAT button again.

The VCR will rewind the tape to beginning of the block and repeat it.

The VCR will repeat the block as many times as the number you set in step 2.

To stop block repeat, press the STOP, or POWER button. You can also cancel block repeat by fast forwarding or rewinding to a point outside the “block.”

CHAPTER FOUR: VCR OPERATION 65