RCA B27TF685 manual Chapter Five, Identifying TV Problems

16061510-CHAPTER 5 12/13/02 12:17 PM Page 69

Chapter Five

T R O U B L E S H O O T I N G

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center.

Identifying TV Problems

Problem	Possible Solution
Poor picture	Try another channel.
	Adjust the antenna.
	Check all wire connections.
Poor sound quality	Try another channel.
	Adjust the antenna.
No picture or sound	Try another channel.
	Press the TV/VIDEO button.
	Make sure the TV is plugged in.
	Check the antenna connections.
No color, wrong colors or tints.	Make sure the program is broadcast in color.
	Adjust the picture settings.
	If the set is moved or turned in a different direction, the power
	should be OFF for at least 30 minutes.
Picture rolls vertically.	Adjust the antenna.
	Check all wire connections.
The TV operates erratically	Unplug the TV for 30 seconds, then try operating it again.

The TV won’t turn on.

Make sure the wall outlet is working.

Disc does not play.	Ensure that the disc is installed with the label side facing up.
	Check the region number of the DVD.
	This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a DVD,
	a VIDEO-CD or a CD.
5.1 channel sound is not being	5.1 channel sound is reproduced only when the following conditions
	are met. :
reproduced.
	1) The DVD player is connected with the proper amplifier.
	2) The disc is recorded with 5.1 channel sound.
	• Check whether the disc being played has the “Dolby 5.1 ch” mark
	on the outside.
	• Check if your audio system is connected and working properly.

CHAPTER FIVE: TROUBLESHOOTING 69