Connections & Setup
PICTURE |
|
Go Back |
|
Picture Preset | Bright... |
Pict. Enhance | High... |
Color Warmth | Normal... |
Brightness |
|
Color |
|
Contrast |
|
Sharpness |
|
Tint |
|
ACCESS AND POWER OPTIONS
Go Back |
|
Remote Config. | TV1.... |
Basic Access | Enabled... |
TV Power | On Always.... |
Energy Saver | Disabled... |
Front Panel | Enabled... |
Par. Controls | Basic... |
Min Stby Power | Enabled... |
Legacy Mode |
|
Info Menu |
|
Channel Guide |
|
Ignore PSIP |
|
Note: The Sleep Timer, Schedule and Energy Saver settings are unavailable when On Always has been activated (in the TV Power menu), even if they were set prior to choosing this option.
Picture Menu
The Picture menu items allow you to adjust the appearance of
Go Back Takes you to the previous menu.
Picture Preset Choose between Soft, Natural, Bright or Personal. The default setting is Natural.
Picture Enhance Controls the level of automatic color correction. Choose between Medium, High or Off.
Color Warmth Choose between Cool, Normal or Warm. The default setting is Normal.
Brightness Adjusts the brightness of the picture.
Color Adjusts the richness of the picture.
Contrast Adjusts the contrast of the picture.
Sharpness Adjusts the sharpness of the picture. When the component inputs are used, this selection is grayed out (disabled).
Tint Adjusts the balance between the red and green levels of the picture.
Access and Power Options Menu
The Access and Power Options menu allows the master user to specify which features and functions basic users will be able to access. Scroll to the feature you want to set. Use the right arrow button to change the setting.
Go Back Takes you to the previous menu.
Remote Configuration This feature allows the master user to determine which TVs the remote operates. Choose from TV1, TV2, TV3, TV1&2, TV1&3, TV2&3, All or Disabled. The default setting is All. If Disabled is chosen, the TV will not respond to the basic remote, but pressing MENU on the master remote will work.
Note: When Remote Config. is set to Disabled, the MENU button on the master remote turns on the TV.
Basic Access This setting allows you to determine whether the TV's basic menus are accessible. Choose Enabled or Disabled. When the basic menu is disabled, users cannot access menus through the basic remote or front panel.
TV Power This setting allows you to determine whether the TV can be turned on or off with the POWER button on the remote or the front panel. Choose between:
On Always The TV is always on and cannot be turned off; the Sleep Timer, Schedule and Energy Saver settings are disabled.
Note: When the DSCI (Digital Serial Communications Interface) port is used to turn the TV on and off, the On Always setting is overridden.
12 | Chapter 1 |