Connections & Setup
MENU/OK CH | CH | VOL | VOL |
|
|
| POWER |
AUDIO
L/MONO R VIDEO
The Front of Your TV
Front Input Jacks
Your model has a set of audio/video inputs for your convenience. These jacks are towards the front of the TV on the side. To access the component you connected to the front of the TV, press the INPUT button on your remote until FRNT appears on the screen. The jacks are ideal for connecting a DVD player, video game console, digital camera or a camcorder.
Note: When connecting a component that only has one audio jack, such as some camcorders, use the TV’s AUDIO L/MONO jack to hear the audio.
L/MONO and R AUDIO Receives audio from another component such as a DVD player, VCR, camcorder, digital camera or video game console.
VIDEO Receives video from another component such as a DVD player, VCR, camcorder, or video game console.
Note: Video Input Channels (VID, SVID, etc.) must be added to the active channel list separately before they can be accessed. Refer to the Setup menu section at the end of this chapter for more information on the Channel menu and List & Labels.
Front Panel Buttons
If you cannot locate your remote, you can use the front panel buttons of your TV to operate many of the TV’s features. MENU/OK Brings up the Main menu. In the menu system, it selects highlighted items.
CH v Scans down through the current channel list. In the menu system, acts like the down arrow button on the remote control and adjusts menu controls.
CH Scans up through the channel list. In the menu system, acts like the up arrow button on the remote control and adjusts menu controls.
VOL < Decreases the volume. In the menu system, acts like the left arrow button on the remote control and adjusts menu controls. VOL > Increases the volume. In the menu system, acts like the right arrow button on the remote control and adjusts menu controls. POWER Turns the TV on and off.
Start-up
The steps below get your TV connected and ready to watch.
Put Batteries in the Master Remote (R130K2)
1.Slide off the cover of the battery compartment.
2.Place the two AA batteries into the remote, matching the + and – end of each battery in the compartment.
3.Replace the cover.
Plug in the TV and Turn it On
Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into the outlet. Press POWER on the TV or remote.
Chapter 1 |