RCA HDLP50 manual Connecting. the Device

Connections & Setup

Red

Yellow

White

Composite cables are color coded- Yellow= video; Red= right audio; white= left audio

Connecting. the Device

This connection allows you to connect a device such as a VCR that has audio/video outputs.

Using the example of a VCR:

1.Connect your cable and/or off-air antenna as described on page 9.

2.Connect your composite audio/video cables to the TV’s input.

Connect composite audio/video cables to the TV’s INPUT 2 jacks (R and L-Audio, and Video) and to the VCR’s audio/video outputs..

•If you are done connecting devices to your TV, go to page 19 to complete the Assisted Setup.

•To continue connecting devices, go to the next page.

	TV button					TV button
		ON•OFF
							ON•OFF
	SAT•CABLE		DVD	TV
	VCR					SAT•CABLE		TV
							AUX DVD
	AUDIO		AUX				GO BACK
	INPUT	GUIDE		ANT•CABLE		VOL		CH
							MUTE
	FORMAT			INFO
						GUIDE		INFO
						FORMAT		SUB
INPUT								CH
	MENU			CLEAR		MENU		CLEAR
button		GO BACK
	VOL			CH
		MUTE
						INPUT		ANT•CABLE
						REVERSE	PLAY	FORWARD
	SUBCHANNEL			SKIP	INPUT	RECORD	STOP	PAUSE
	REVERSE	PLAY		FORWARD button

RECORD STOP PAUSE

CC PRESETS SOUND

Use these buttons to view the picture of the device connected to the TV. Your remote model varies according to the model of TV you have.

Viewing the Picture from the Connected Device

The device in this connection is connected to the INPUT 2 jacks. To view this device:

1.Turn on the TV and the device you want to view.

2.Press the TV button on the remote control to put the remote in TV mode.

3.Press the INPUT button on the remote control to scroll through the Video Input Channels until you see INPUT 2 in the channel banner. See picture below for location.

Note: You can set up the TV to automatically tune to the correct device you want to view. This is called Auto Tuning. See Chapter 3 for more information on Auto Tuning.

Input channel appears here

Program Title/Acquiring Channel 12:39 PM

Input 2

Chapter 1 15