RCA HDLP50 manual Audio Menu, Sound Preset Mode, Sound Logic, Balance

Using the TV’s Menu System

0Go Back

1Picture Menu

2Audio Menu

3Channel Setup

4Setup Options

Main Menu

The Audio menu has screens for setting the audio features and for tweaking the sound:

•Sound Preset Mode

•Sound Logic

•Balance

•Advanced Audio

Press OK or4to access the Audio menu.

Audio Menu

The Audio menu lets you adjust audio output. To access the Audio menu, press MENU on the remote, and then select Audio from the main menu. The following audio items can be adjusted: Sound Preset Mode, Sound Logic, Balance, and Advanced Audio.

	Main Menu4Audio Menu
0 Go Back	Standard	Standard Preset Settings
1 Sound Preset Mode	Music	+12
2 Sound Logic	Voice
	Video Camera
3 Balance
	Personal	0 dB

4Advanced Audio

-12

7	5	3	0	1	2	3
120	200	500	1.2	3	7.5	12
Hz	Hz	Hz	kHz	kHz	kHz	kHz

For each input select a different equalizer preset or create a

Personal preset with the equalizer. Press OK to continue.

Sound Preset Mode

You can select one of the seven-band Sound Preset Modes or create your own personal preset. The seven-band graphic equalizer lets you adjust the audio frequency settings. The equalizer can only be changed if Fixed/Variable Out is set to Variable Level, Speakers On in the Advanced Audio menu. If Fixed/Variable Out is set to Fixed Level, you cannot make changes to the equalizer and the bands are set to 0dB. However, the graphic equalizer levels for Variable Level, Speakers On are stored in memory in case you switch from Fixed Level back to Variable Level, Speakers On.

Note: Sound Preset Modes are stored for each input. All other audio feature settings are stored globally across all inputs and not per input.

Sound Logic

Acting like a dynamic range limiter, it compresses the dynamic range to limit sudden volume increases (for example, the sudden increase in volume you sometimes hear when a commercial starts). Choose On or Off, depending on your preference.

Balance

The Balance setting applies to the internal speakers and the headphone output. Balance is how much audio (loudness) gets sent to the left and right speakers.

Note: Balance applies if Fixed/Variable Out is set to Variable Level, Speakers On. See the following page for more information.

Chapter 4 53