VCR Features
Mapping VCR Plus+ Channels Manually
Using the VCR Plus+ SILVER system can make taping timer recordings for cable or
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+: ON
VCR Plus+ data was not found.
0 Exit
VCR+ Channel My Channel
5
4
3
2 | |
1 |
Use CH+/- to select Press
VCR+ Channel My Channel
5 46
4
3
2 | |
1 |
Use CH+/- to select Press
(Screen shown is for an example only.)
1.Press the MENU button to display the VCR MAIN MENU.
2.Press the 4 button to choose CHANNELS.
3.Press the 4 button to choose VCR Plus+ Setup.
4.Press 1 to display the Set Channel Lists menu.
5.Enter the data following the
Recording Broadcast Stereo TV or SAP (Second Audio Program)
Some TV programs are broadcast with stereo audio or SAP (Second Audio Program). For details about turning on broadcast stereo or SAP, see page 38.
1.Turn on the TV and tune it to the VCR viewing channel (either 03, 04, or the TV’s Video Line Input).
2.Insert a tape with its safety tab in place.
3.If your VCR viewing channel is 3 or 4, make sure the VCR indicator appears in the front display. If not, press the TV•VCR button on the remote control to turn it on.
4.Press the SPEED button on the remote control if you want to override the preferred Tape Speed setting. The tape speed indicator appears on the TV screen.
5.Select the channel or Video Line Input to be recorded.
6.Set the Reception: STEREO/MONO/SAP feature for the type of audio you want to record.
7.Press RECORD to start recording.
8.Press STOP when finished.
Chapter 4 | 35 |