VCR Features
VCR Plus+® SILVER System
The VCR Plus+ SILVER system makes VCR set up easier by setting and updating the clock and channel list for you automatically. During the
Time, date, and VCR Plus+ system information are downloaded from participating TV stations over your antenna or cable system. Time and date information are updated each time the VCR is turned off (and after every power interruption). So, when your TV stations or cable company update their lineups, your VCR will get the most current channel list automatically, freeing you from having to manually change the channel list yourself.
If your VCR Plus+ SILVER system fails to download the proper information for any reason, you can always manually map the channels. You can also turn off AUTO VCR Plus+ if you keep getting prompts about multiple cable services by pressing the 2 button in the VCR Plus+ SETUP menu.
VCR PLUS+ SETUP
Last automatic setup was unsuccessful. Would you like to:
1 Try again
2 Finish setup manually
3 Cancel the auto setup
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+: ON
VCR Plus+ data was not found.
Turning ON or OFF the
Auto VCR Plus+ download
If the automatic VCR Plus+ download continuously fails for any reason, you will see the prompt to the left.
If you decide to turn off Auto VCR Plus+ all together, you can do this by:
1.Press the MENU button on the remote control to access the VCR’s MAIN MENU
2.Press 4 to access the CHANNELS menu.
3.Press 4 to access the VCR Plus+ Setup menu.
4.Pressing 1 will take you to a screen to manually map VCR Plus+ channels. Pressing 2 will toggle between Auto VCR Plus+: ON or OFF.
Make sure this feature is turned off if you continually get fail to download prompts and map the channels manually.
0 Exit
VCR Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation. The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
34 | Chapter 4 |