References
Location of Controls
Back Panel
IN FROM
ANT.
|
|
|
| VHF/UHF | |
AUDIO1 | VIDEO1 | OUT TO TV | |||
OUT | IN | OUT | IN | ||
| |||||
|
|
|
| 3 CH. 4 |
3CH.4 Switch
Selects the channel to which you tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
IN FROM ANT. (Antenna) Connector
Receives a signal from an antenna or cable system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN and AUDIO1 IN Jacks
Receive signals from another component like a VCR or camcorder when it is connected to these jacks. Use INPUT (or channel 00) on the remote to select.
VIDEO1 OUT and AUDIO1 OUT Jacks
Send signals from VCR to another component like a VCR or camcorder when it is connected to these jacks.
Display Panel
POWER VCR TIMER RECORD
POWER Indicator
Lights when the VCR is turned on.
RECORD Indicator
Lights when the VCR is recording.
VCR Indicator
Lights when using the TV•VCR button.
When using one of the basic hookups:
•The picture is coming from the VCR when the VCR indicator is on.
TIMER Indicator | • The picture is coming from the television |
Shows VCR is set for timer recording when VCR is | channels when the VCR indicator is off. |
| |
turned off. |
|
Flashes when the clock is not set. |
|
Flashes when a timer recording is set and there is |
|
no cassette in the VCR. |
|
23