RCA VR602HF manual DISPLAY Button, Time Counter, Using the Playback Features, Playing a Tape

Page 18

DISPLAY Button

Playing a Tape

Using the Playback Features

DISPLAY Button

1.Press DISPLAY to display the status of the VCR, channel number, time counter, date, time, and tape speed on the TV screen.

You must set the time and date before they can be displayed. If you do not press DISPLAY again, this display times out.

2.Press DISPLAY again to continually display the time counter on the TV screen.

3.Press DISPLAY again to return to the normal status displays.

Time Counter

Press

DISPLAY

Press

DISPLAY

Again

STOP CH 05 0:30:00

Status Displays

11/17/95 FRI 01:30AM SLP

0:30:00

Hours

Minutes

Seconds

Time Counter Only

The time counter shows the actual time it takes to record a program or play back a segment of a prerecorded tape. It helps locate the beginning or end of programs you taped. The time counter resets to 0:00:00 when the tape is ejected from the VCR.

For example, if you recorded a 30-minute program at the beginning of the tape, you would:

1.	Insert the prerecorded tape.
2.	Press DISPLAY twice to display only the time counter
	on the TV screen.
3.	Press FF to fast forward the tape until 0:30:00 appears
	in the time counter. Press STOP.
	This is the end of the program. You can begin recording

STOP CH 05 0:30:00

Status Displays

Press

DISPLAY

Again		11/17/95 FRI 01:30AM SLP

POWER

	a new program.
4.	Press CLEAR to reset the time counter to 0:00:00.
5.	Press DISPLAY to remove the time counter from the
	screen. These displays time out.
	The time counter is removed from the TV screen during
	picture search.

	PAUSE
REW
SLOW
1	STOP
2	STOP

43

5

76

8

9

0 INPUT

MENU
SPEED	CLEAR
F.	ADV
	ADV
TRACKING

TV•VCR	PREV
	PREV	CH	DISPLAY
		CH
PLAY
PLAY
		REC
	FF
SEARCH
CHAN

16

Image 18

Contents USER’S GUIDE VIDEO CASSETTE RECORDERVR602HF Cautions Important InformationIntroduction Product RegistrationUsing the Remote Control Table of ContentsSetting Up the VCR Important InformationHow to hook up a stereo amplifier/receiver 1. How do you receive your TV signals?Optional Hookups How to hook up two VCRs for copying tapes Choosing a Hookup2. Plug in power cords of VCR and TV 1. Set the 3CH.4 switch on back of VCR to either channel 3 or3. Plug in power cords of VCR and TV Antenna or Cable System Without a Cable BoxCable System With Cable Box to Unscramble All Channels 3. Plug in power cords of VCR, TV, and cable box2. Plug in power cords of VCR, TV, and cable box Cable BoxBack of TV Cable System With Cable Box to Unscramble Only Pay Channelssuch as HBO, Showtime, Pay-Per-View, etc Cable Box4. Plug in power cords of VCRs and TV. 5. Continue to page Connecting Two VCRs for Copying Tapes2. Set the 3CH.4 switch on the playback VCR to either channel 3 or 3. Plug in power cords of VCRs and TV. 4. Continue to pageRecord on the VCR from an amplifier/receiver Connecting a Stereo Amplifier/Receiver3. Plug in power cords of amplifier/ receiver, VCR, and TV Back of Amplifier/ReceiverStartup Setting Up the VCR1. Check accessories with VCR 2. Insert batteries in remote 3. Turn on the TV5. Place channels in the VCR’s memory 6. Add or remove channels from the VCR’s memory8. Set AUTO TV/VCR feature 7. Use TVVCR buttonSkip this step if you used one of the advanced hookups 9. Set the time and date 10. Select the language/sélectionner la langueCHAN Channel Up or Down Using the Remote ControlVCR Function Buttons CLEARPAUSE POWERNumbers 0 through PLAYOperating Instructions Playing a TapeTo play a tape Picture Search Using the Playback FeaturesAUTO PLAY Feature Fast Forward SearchDISPLAY Button Time CounterZero Search Commercial Scan SEARCH ButtonSlow Motion Automatic Tracking Pause for Stop ActionFrame Advance F. ADV Button Manual TrackingPLAYBACK HI-FI/MIX/LINEAR Feature To Select Playback SoundRecording a Program Types of RecordingsBasic Recording - Operating Instructions Recording SpeedsStopping a Recording in Progress Express RecordingOperating Instructions Recording Display on TV ScreenStereo Broadcast TV or SAP Second Audio Program To record stereo broadcast TV or SAPLINEAR to hear SAP. Details are on page Recording Audio Only To Record Audio Only Refer to hookup on pageRecording While You’re Away Timer Recording Setting a Timer RecordingStopping a Timer Recording Timer Recording From the VCR’s Line Input Checking or Clearing Timer Recordings2. Press 2 for REVIEW PROGRAMS Using Two VCRs for Copying and Editing Tapes Copying and Editing Tapes Using Compatible RemoteOperating Instructions Refer to hookup on page Video Signal System SpecificationsCleaning the VCR Power RequirementTape Compartment Location of ControlsFront Panel CHANNEL or TRACKING up or downOUT TO TV Connector 3CH.4 SwitchIN FROM ANT. Antenna Connector Hi-Fi IndicatorTrouble No powerTrouble Checks Heres what to tryCABLE/ANTENNA feature is set to CABLE. Details are on page Timer recording not madeVCR makes noise when stopped Cassette with safety tab removed does not start toHow you get service Limited WarrantyWhat your warranty covers What your warranty does not coverREMOVE/ADD CHANNEL Menu IndexPOWER Button LANGUAGE LANGUE MenuCanadian Consumers Your toll free numbers are English French or Authorized Servicenter call toll-free in the USAFor your nearest Home Entertainment Dealer VQTS3190 A