RCA VR602HF Back Panel, Display Panel, 3CH.4 Switch, IN FROM ANT. Antenna Connector, References

Page 31

Back Panel

References

Location of Controls

Back Panel

R		IN FROM
		IN FROM
AUDIO1		ANT.
L		VHF/UHF
OUT	IN	OUT TO TV
OUT	IN
		3 CH. 4
VIDEO1

3CH.4 Switch

Selects the channel to which you tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.

IN FROM ANT. (Antenna) Connector

Receives a signal from an antenna or cable system when attached.

OUT TO TV Connector

Passes signal to TV using the cable supplied.

VIDEO1 IN and AUDIO1 (R and L) IN Jacks

Receive signals from another component like a VCR or camcorder when it is connected to these jacks. Use INPUT on the remote to select.

VIDEO1 OUT and AUDIO1 (R and L) OUT Jacks

Send signals from VCR to another component like a VCR or camcorder when it is connected to these jacks.

Display Panel

POWER VCR TIMER RECORD

Hi-Fi STEREO SAP

Hi-FiIndicator

Lights when PLAYBACK: HI-FI/MIX/LINEAR

feature is set to HI-FIor MIX.

POWER Indicator

Lights when the VCR is turned on.

RECORD Indicator

Lights when the VCR is recording.

STEREO Indicator

Lights when the station you are tuned to is broadcasting stereo.

SAP Indicator

Lights when the station you are tuned to is broadcasting SAP.

TIMER Indicator

Shows VCR is set for timer recording when VCR is turned off.

Flashes when the clock is not set or a timer recording is set and there is no cassette in the VCR.

VCR Indicator

Lights when using the TV•VCR button.

When using one of the basic hookups:

•The picture is coming from the VCR when the VCR indicator is on.

•The picture is coming from the television channels when the VCR indicator is off.

29

Image 31

Contents VIDEO CASSETTE RECORDER USER’S GUIDEVR602HF Product Registration Important InformationIntroduction CautionsImportant Information Table of ContentsSetting Up the VCR Using the Remote ControlChoosing a Hookup 1. How do you receive your TV signals?Optional Hookups How to hook up two VCRs for copying tapes How to hook up a stereo amplifier/receiverAntenna or Cable System Without a Cable Box 1. Set the 3CH.4 switch on back of VCR to either channel 3 or3. Plug in power cords of VCR and TV 2. Plug in power cords of VCR and TVCable Box 3. Plug in power cords of VCR, TV, and cable box2. Plug in power cords of VCR, TV, and cable box Cable System With Cable Box to Unscramble All ChannelsCable Box Cable System With Cable Box to Unscramble Only Pay Channelssuch as HBO, Showtime, Pay-Per-View, etc Back of TV3. Plug in power cords of VCRs and TV. 4. Continue to page Connecting Two VCRs for Copying Tapes2. Set the 3CH.4 switch on the playback VCR to either channel 3 or 4. Plug in power cords of VCRs and TV. 5. Continue to pageBack of Amplifier/Receiver Connecting a Stereo Amplifier/Receiver3. Plug in power cords of amplifier/ receiver, VCR, and TV Record on the VCR from an amplifier/receiver2. Insert batteries in remote 3. Turn on the TV Setting Up the VCR1. Check accessories with VCR Startup6. Add or remove channels from the VCR’s memory 5. Place channels in the VCR’s memory7. Use TVVCR button 8. Set AUTO TV/VCR featureSkip this step if you used one of the advanced hookups 10. Select the language/sélectionner la langue 9. Set the time and dateCLEAR Using the Remote ControlVCR Function Buttons CHAN Channel Up or DownPLAY POWERNumbers 0 through PAUSEPlaying a Tape Operating InstructionsTo play a tape Fast Forward Search Using the Playback FeaturesAUTO PLAY Feature Picture SearchTime Counter DISPLAY ButtonCommercial Scan SEARCH Button Zero SearchSlow Motion Manual Tracking Pause for Stop ActionFrame Advance F. ADV Button Automatic TrackingTo Select Playback Sound PLAYBACK HI-FI/MIX/LINEAR FeatureRecording Speeds Types of RecordingsBasic Recording - Operating Instructions Recording a ProgramRecording Display on TV Screen Express RecordingOperating Instructions Stopping a Recording in ProgressTo record stereo broadcast TV or SAP Stereo Broadcast TV or SAP Second Audio ProgramLINEAR to hear SAP. Details are on page To Record Audio Only Refer to hookup on page Recording Audio OnlySetting a Timer Recording Recording While You’re Away Timer RecordingStopping a Timer Recording Checking or Clearing Timer Recordings Timer Recording From the VCR’s Line Input2. Press 2 for REVIEW PROGRAMS Copying and Editing Tapes Using Compatible Remote Using Two VCRs for Copying and Editing TapesOperating Instructions Refer to hookup on page Power Requirement SpecificationsCleaning the VCR Video Signal SystemCHANNEL or TRACKING up or down Location of ControlsFront Panel Tape CompartmentHi-Fi Indicator 3CH.4 SwitchIN FROM ANT. Antenna Connector OUT TO TV ConnectorHeres what to try No powerTrouble Checks TroubleCassette with safety tab removed does not start to Timer recording not madeVCR makes noise when stopped CABLE/ANTENNA feature is set to CABLE. Details are on pageWhat your warranty does not cover Limited WarrantyWhat your warranty covers How you get serviceLANGUAGE LANGUE Menu IndexPOWER Button REMOVE/ADD CHANNEL MenuVQTS3190 A or Authorized Servicenter call toll-free in the USAFor your nearest Home Entertainment Dealer Canadian Consumers Your toll free numbers are English French