RCA BLD-6HD1 If all the settings are correct, press OK to confirm, Video off, Button, Press OK

Page 12

Timer review - changing and erasing record settings

	4	If all the settings are correct, press OK to confirm.
	4	The on screen display will remind you to enter a cassette and turn

		the video off.

	5	Switch your video off by pressing the
	5	button.
		button.

You can switch your video on again if you want to set the timer to record another programme. Remember to switch the video off when you have finished.

•	The video will warn you if you have set the timer to start recording a second programme before the
	first programme has finished. If you don’t adjust the times, the video will record the first
	programme completely, then start to record the second one.
•	If there is not enough free space for the recording on the cassette the video will automatically

1

2

TIMER PROGRAM

PR START END DATE 01 18:10 20:30 15/08 03 21:20 22:20 16/08

PR+/-:SELECT

OK:CONFIRM MENU:END

TIMER PROGRAM

PR START END DATE

0118:10 20:30 15/08 03 21:20 22:20 16/08

PR+/-:SELECT

OK:CONFIRM MENU:END

Press MENU.

Choose "Timer Program" then press OK.

Select the program you want to change or erase by pressing PR+ or PR-.

Press OK to confirm.

	switch to ‘LP’ to double the recording time left on the cassette.
•	The recorder will eject cassettes which have the safety tab removed (page 23)
•	To stop a recording which has already started, press and hold the STOP button for about five
	seconds until the video stops recording.

3a

TIMER PROGRAM (ONCE)

PR	01
START TIME	18:10
END TIME	20:30
START DATE	15/08(FRI)
TAPE SPEED	LP

PR+/-:SELECT (AV)

0-9 : SETUP (PR) / :CORRECT

OK:CONFIRM MENU:END

3b

TIMER PROGRAM (ONCE)

PR	03
START TIME	21:20
END TIME	22:20
START DATE	16/08(SAT)
TAPE SPEED	SP

0 :ERASE

/ :CORRECT MENU:END

Changing a setting

Select the details you want to change by pressing or .

Use the number buttons 0 to 9 to change the settings. Use PR+ to select the AV channel, to change the tape speed.

When you have made all the changes, press or until you see ‘OK : confirm’ on the bottom line of the screen.

Press OK.

Remember to load a cassette and switch the video off by

pressing .

Erasing a setting

Press the number 0.

Press OK to confirm.

Press MENU twice to end.

20

21

Image 12

Contents Video Recorder BLD-6HD1 For your own safety PrecautionsContents Read this booklet carefully200-240V, 50/60Hz Back view of your VCRPress Other VCROther VCR Audio Amp DevicesChange the RF output from 36 using the remote control If there is still picture interference repeat option2Press Menu to end Displayed on the front of your videoPress OK to confirm the settings, and press Menu to end Setting time and dateManual tuning ‘P-xx’ Press OK to confirm Set the station you wantPress Menu Confirm by pressing the OK buttonConfirm with the OK button Press Menu to end Or press the 1 button to create the station nameChange the station Recording or one-touch record PlayFast forward or rewind the cassette from stop Front panel controls Press to switch back to normal playback Press Backwards Control slow motion speed in six stepsChoose OSD ON/OFF Press to start your recordingIf you want OSD OFF mode, press PR- and press OK Press to continue recording Press to stop your recordingWant to change using the and buttons Normal timer recordingRecording cassettes One-touch recording-OTRIf all the settings are correct, press OK to confirm Video offButton Press OKResetting the counter to zero Clock and counter displayRemaining time and cassette length CassettesAuto power off DimmerWhile a bilingual performance is being broadcast Press Menu to confirmTechnical information Dimensions Power supplyIndex SystemBlue screen is displayed when you switch the video on TV/VCR button on the video remote control will not workVideo has a number other than 36 when RF appears Problem-solving guideStage 2. Tuning in your TV Point the remote control at the video and press OKStage 1. Connecting the video to your TV Plug your aerial into the ANT in socket of the video