RCA BLD-6HD1 instruction manual Video has the time or -.- on the display, Problem-solving guide

Page 16

-MEMO-

✎

Problem-solving guide

The video has the time or - -.- - on the display

If while you are setting up the video, the timer or - -.- - is in the display, the video is switched off or has already gone through the autoset procedure (OK has already been pressed). In this case, please turn to page 6 and carry out step 2 until you see the manual tuning screen.

A blue screen is displayed when you switch the video on

If a blue screen appears when you switch the video on, the AV button has been pressed. Press AV on the remote control until P-_ _ appears on the display of the video, or until a TV picture is displayed.

The TV/VCR button on the video remote control will not work

This button will only work if the TV has the appropriate internal switch and a scart lead is connecting the TV and video.

* TV/VCR button is not available for this set

The television will not change channel when the video is turned on

If the television will not change channel while the video is on, check whether a scart lead has been connected. (See page 3 option 2)

If a scart lead has been connected, you need to press the TV/VCR button on the video remote control. When the small VCR symbol appears on the display, you can only change channel by using the video remote control.

If the TV/VCR button on the video remote control does not work, read the instruction book for the TV to find out about an audio video button.

* TV/VCR button is not available for this set

The video has a number other than 36 when RF appears

A number other than 36 might be displayed on the video when RF is flashing in the display. This means that the number has been adjusted in the past.

The TV needs to be tuned in to get the blue auto set or auto search screen. (Refer to page 6)

28

29

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Video Recorder BLD-6HD1 For your own safety PrecautionsContents Read this booklet carefully200-240V, 50/60Hz Back view of your VCRPress Other VCROther VCR Audio Amp DevicesChange the RF output from 36 using the remote control If there is still picture interference repeat option2Press Menu to end Displayed on the front of your videoPress OK to confirm the settings, and press Menu to end Setting time and dateManual tuning ‘P-xx’ Press OK to confirm Set the station you wantPress Menu Confirm by pressing the OK buttonConfirm with the OK button Press Menu to end Or press the 1 button to create the station nameChange the station Recording or one-touch record PlayFast forward or rewind the cassette from stop Front panel controlsPress to switch back to normal playback PressBackwards Control slow motion speed in six stepsChoose OSD ON/OFF Press to start your recordingIf you want OSD OFF mode, press PR- and press OK Press to continue recording Press to stop your recordingWant to change using the and buttons Normal timer recordingRecording cassettes One-touch recording-OTRIf all the settings are correct, press OK to confirm Video offButton Press OK Resetting the counter to zero Clock and counter display Remaining time and cassette length CassettesAuto power off DimmerWhile a bilingual performance is being broadcast Press Menu to confirmTechnical information Dimensions Power supplyIndex SystemBlue screen is displayed when you switch the video on TV/VCR button on the video remote control will not workVideo has a number other than 36 when RF appears Problem-solving guideStage 2. Tuning in your TV Point the remote control at the video and press OKStage 1. Connecting the video to your TV Plug your aerial into the ANT in socket of the video
Top Page Image Contents