RCA VGM500 manual Use Tvvcr button, Set the time and date

Setting Up the VCR

Startup

11. Use TV•VCR button.

Skip this step if you used one of the advanced hookups.

When using one of the basic hookups, the TV•VCR button lets you switch between the picture coming from the VCR or the picture from the TV channel. This button lets you record a program on the VCR while watching another channel on the TV. Details are on page 26.

The VCR will automatically switch the TV¥VCR setting to VCR every time the VCR is turned on, a tape with the safety tab removed is inserted, or you press PLAY.

A.Press VCR1 to set the remote to control the VCR.

B. Press TV•VCR to see the picture from the VCR.

The VCR indicator lights in the display panel.

C. Press CHANNEL up or down to change channels on the VCR.

The channel number changes in the display panel.

D. Press TV•VCR to see the TV channels.

The VCR indicator does not light in the display panel.

Change channels using the TVÕs remote.

E. Return the TV to the VCR viewing channel (3 or 4) Ñ the same Output Channel you selected in step 6.

F. Press VCR1, then TV•VCR to switch back to the picture from the VCR.

12. Set the time and date.

When you first turn on the VCR, Ð Ð : Ð Ð appears in the clock area of the VCRÕs display panel.

A. Press MENU•PROG on remote to see VCR MAIN

MENU on the TV screen.

B. Press 2 to display SET CLOCK.

C. Enter the time and date with the number buttons on the remote.

¥Press 0 before single-digit numbers. Example: press 0, then 5, then 0, then 7 for a time of 5:07. Press 1 for AM or 2 for PM.

¥Press CLEAR on the remote to change incorrect entries.

D. Press MENU•PROG to remove the SET CLOCK menu from the TV screen and start the clock.

E. Press 0 to exit the menu system.

Whenever you press DISPLAY on the remote, the time and date appear on the TV screen and the time appears in the display panel.

VCR SLP

VCR MAIN MENU

1 Timer Recordings

2 Set Clock

SET CLOCK

Time --:-- (hh:mm)

Date --/--/--

Press MENU to exit

11