References
Location of Controls
Back Panel
OUTPUT | INPUT |
AUDIO VIDEO | AUDIO VIDEO |
IN FROM
ANTENNA
OUT TO TV
3 4
CH |
CH3 CH4 Switch
Selects the channel to which you will tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
IN FROM ANTENNA Connector
Receives a signal from an antenna or cable system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO and AUDIO INPUT Jacks (L1)
Receives signals from another component, like a VCR or camcorder, when it is connected to these jacks. Use INPUT to select L1 for these jacks.
VIDEO and AUDIO OUTPUT Jacks
Sends signals from VCR to another component, like a VCR or camcorder, when it is connected to these jacks.
37