RCA VR636HF manual Tracking, GO-TO Search

OTHER FEATURES

GO-TO SEARCH

The Go-T o search feature enables the VCR to quickl y locate a counter reading anywhere on the tape. When the VCR locates the counter reading, it will begin playback.

1.Press ST OP.

2.Press SEARCH on the remote until the GO-TO SEARCH menu appears on the screen.

3.Press number buttons to enter the hour(s) and/or minutes of the counter reading you want the VCR to “go to”. Press CLEAR on the r emote to cor rect an entry.

4.Press FOR WARD to sear ch forward or REVERSE to sear ch in reverse.

5.Press ST OP to stop Go-T o searching.

TRACKING

YourVCR has automatic tracking which r emoves the streaks or snow from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a differentVCR. Just use theTRA CKING buttons to r emove the streaks or snow.You can also use tracking when you pause a tape to reduce jittering of the picture.

When you manually adjust the picture, automatic tracking is turned off.To turn automatic tracking back on, press both TRACKING buttons on the front of the VCR at the same time, or eject the tape and re-insert it.

Tracking has no effect during recording--only playback.

GO-TO SEARCH

Current tape counter is 2:17:25

Press REV or FWD to go to -:--:00

Press SEARCH to exit.

44