RCA VR636HF manual Timer Recording Information, Press 2 to display the Timer Recordings menu

RECORDING

TIMER RECORDING

You can set up as many as eight timer recording programs.

1. Press MENU to display the VCR MAIN MENU.

VCR MAIN MENU

1 VCR Plus+

2 Timer Recordings

3Time

4Channels

5Setup

6Preferences

7Audio

8Language

0Exit

2.Press 2 to display the TIMER RECORDINGS menu.

TIMER RECORDINGS

1 Create a New Program

2 Review Existing Progs.

3 Use VCR PLUS+ Code

0Exit

3.Select 1 to Create a New Program.

How often should this program record?

1 One time

2 Daily (every day)

3 Weekdays (M-F)

4 Weekly (once per week)

0Cancel

4.Select how often you want the program to record.

Program 1 (One time)

Channel	--
Start Time	--:--
End Time	--:--
Start Date	--/--/--
Tape Speed	SLP
Press MENU	to cancel

5.Enter the data for the program with the number buttons.

The data includes the channel number (press INPUT to select the line input), start time including AM or PM, and end time. The start date is automatically entered based on the VCR clock. The date and/or speed can be changed when flashing.

Timer Recording Information

Clock must be set correctly.

Insert a tape with the safety tab in place and enough tape to record the program.

PROGRAMS OVERLAP appears if you have entered two programs where the times overlap.

The TIMER indicator appears in the display when you turn off the VCR and a timer recording has been set. It flashes if there is no tape in the VCR.

If your cable box or satellite receiver can not be controlled by the VCR, turn it on and tune it to the channel you want to record before the recording is to begin. The VCR channel should be set to the box’s output channel, usually Channel 3 or 4.

31