RCA VG4038/ VG4039 Place dhannels in the VCR’s memory, PressVCR1 to set remote to control VCR

Page 10

Startup

5. Place dhannels in the VCR’s memory.

Channels 2 through 13 including line input (L) are in the VCR’s memory when you first turn it on. Pressing CHANNEL up or down stops on these channels. To get additional channels available on your antenna or cable system, you must use the Auto-Search Channels feature of the VCR. If you ever change cable or antenna signals, you may need to Auto-Search channels again.

A.PressVCR1 to set remote to control VCR.

B.Press MENU*PROG on the remote to seethe VCR MAIN MENU on the TV screen. If the menu does not appear on the TV screen:

lMake sure TV is tuned to same channel as CH3 CH4 switch on VCR or the TV’s video input (refer to TV’s manual).

b Press VCR1 and then press MENU*PROG.

lIf you use a basic hookup, check VCR indicator in display panel - it should be on. PressTVWCR to turn it on.

lCheck the connections.

C.Press 4 to select CHANNEL SETUP.

D.Press 1 to begin Auto-Search Channels.

Wait until the channel numbers stop changing. This takes about one to two minutes. The TV will then tune to the lowest channel found. Pressing CHANNEL up or down will select only the active channels.

The VCR automatically selectsANTENNA or CABLE of the

Tuning Mode feature in the CHANNEL SETUP menu. If you need to change the setting manually, press 3.

jY(R

1 VCR Plus+ Programming

2,Timer Programming

3 Review Programs

4 Channel Setup

CHANNEL SETUP

_	1	Auto-Search			Channels
	2	AddlRemqve			Channels
	3	Tuning		Node:	ANTENNA
	4	Sat./Cable			Box Setup
	0	Exit	to	Main	Menu

6. Add or remove channels from the VCR% memory.

You may want to add or remove channels if some of the channels are I

not active, have weak signals, or you do not want to watch them.

VCR-MAIN MENU

A.Press VCR1 .

B.Press MENU*PROG on the remote to see the VCR MAIN MENU on the TV screen.

C.Press 4 to display the CHANNEL SETUP menu.

D. Press 2 to display the ADD/REMOVE CHANNEL menu.

E.Follow the directions on the screen.

F.Add or remove more channels-by entering channel numbers or using CHANNEL up and down buttons.

CH 03

is presently ADDED

Image 10

Contents Page Important Information VG4039Table of Contents Choosing a Hookup Optional Hookups How to hook up two VCRs for copying tapes?What type of Cable-TV system* do you have? Advanced hookup Plug in power cords of VCR and TVBasic hookup Connect as shownPlug in power cords of VCR, TV, and cable box Cable System With Cable Box to Unscramble All ChannelsConnect as shown Cable Box CablexII,~,IIII.xII Cable System With Cable Box to Unscramble Pay ChannelsSuch as HBO, ShowWe, Pay-Per-View, eta Back of VCROption a hookup Connecting Tbo VCRs for Copying TapesPlug in power cords of VCRs and TV Option B hookupInsert batteries in remote Tlurn on the TV Check accessories with VCRStartup IUrn on the VCRAdd or remove channels from the VCR% memory Check the connections Press 4 to select Channel SetupPlace dhannels in the VCR’s memory PressVCR1 to set remote to control VCRSkip this step if you used one of the advanced hookups Use TVeVCR buttonSet the time and date Press VCR1 to set the remote to control the VCRComponent Buttons ButtonisVCR Function Buttons Buttons TV Function ButtonsControlling a TV Program the VCR for remote controlControlling a VCR Operate the TVTo play a tape Operating InstructionsPress PLAY, if necessary Pause for Stop Action Using the Playback FeaturesAuto Play Feature Slow MotionAutomatic Tracking Display ButtonFrame Advance F.ADV Button Manual TrackingIndex Search Time CounterInsert the prerecorded tape and press Stop Go-To Search Time SearchCommercial Scan Search Button Types of Recordings Basic Recording Operating InstructionsRecording Speeds Recording FeaturesRecording Pause Operating Instructions One Touch Recording OTRMinutes up to 4 hours Press MENU*PROG on the remote to display Recording While You’re AwayPress Clear to erase a number A. Lisf Recording While You’re Away VCR Plus+* RecordingChannel Canadian ListSetting a VCR Plus+ Recording Recording While You’re Away VCR Plus+ RecordingRecording While You’re Away Timer Recording Setting a Timer RecordingTimer Recording From the VCR’s Line Input Recording While You’re Away TimerChecking or Clearing VCR Plus+ and Timer Recordings RecordingUsing Dual Remote with AutoEdit’ Using ‘Fwo VCRs for Copying and Editing ~TapesOperating InStructions Refer t0 hookup 0n Specifications Cleaning the VCRFront Panel Location of ControlsBack Panel Display Panel for VG4038 Display Panel for VG4039Trouble Double ChecksHere’s what to try Trouble Checks Trouble Here’s What To tryLimited Warranty Index Add Remove ChannelsPrintedin Singapore 20258570