Setting a VCR Plus+ Recording

Recording While You’re Away (VCR Plus+ Recording)

The VCR Plus+ and timer program features let you program the VCR to record up to eight different programs within a one year. period. Before using VCR Plus+ to record a program, make sure that:

lThe clock is set correctly.

l A tape with safety tab has been inserted with enough tape to record the programs. l The remote is set, to control the VCR - using VCR1 (VCR2).

l The VCR is setup for VCR Plus+ programming.

- If you receive all channels through a cable box, select a cable box viewing channel on

page 21.

- If you do not use a cable box for all channels, complete VCR Plus+ Setup on puge 22.

1.Press MENU*PROG on the remote to display the VCR MAIN MENU on the TV screen.

2.Press 1 to display the VCR PLUS+ menu.

3.Press numbers on the remote to enter PlusCode number for the program you want to record. VCR PlusCode numbers are found in most local TV listings.

Press CLEAR on the remote to correct an entry.

4.Press MENU*PROG to enter the program.

If the VCR does not recognize the PlusCode number,

Unrecognized number... Please re-enter appears on the TV screen. Check the number and enter it again.

5.Press 1, 2, 3, or 4 to select type of program.

1 One time - single program recorded once.

2 Daily - program recorded at same time every day.

3 Weekdays - program recorded at same time Monday through Friday.

4 Weekly - program recorded at same time once a week.

6.Select recording speed using the SPEED button.

7.Press CLEAR if you want to change the program End Time.

This feature allows you to extend the recording time on VCR Plus+ programs. This option may be useful when recording programs such as sporting events that could go past scheduled broadcast times.

8.Press MENU*PROG to enter your program. A reminder

appears which will time out or you can press MENU*PROG to return to the VCR MAIN MENU.

PROGRAMS OVERLAP may appear on the screen if you entered two programs where the times overlap.

9.Repeat steps 2 - 6 for additional programs or press

MENU*PROG to remove the menu from the TV screen.

10.Turn off the VCR before recording time.

TIMER appears in the%R’s display panel.

11.If using a cable box, leave it turned on and tuned to the channel you want to record.

Stopping a Recording in Progress

With the VCR: Press POWER, then STOP within a few seconds.

With the Remote: Press VCR1 (VCR2), then STOP within a few seconds.

VCR MAIN MENU

1 VCR Plus+ Programming

VCR PLUS+

Enter Plus Code number

(from,,TV listing)

How often should this

program record?

1	One		time
2	Daily			(every		day)
3	Weekdays			(Man	-	Fri)
4	Weekly			(once/week)
PROGRAH			1 - ONE TIME
Channel					CABLE
;;;r;i;;me				%lO		PM
				03:35		PM
Start			Date	.1,1./21193		Sun
Tape		Speed		>,LP

Press CLEAR to correct

Press MENU to save