02Connecting up
Connecting to a cable box or satellite receiver (1)
If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, we recommend using the setup on the following page.
Using the setup on this page you can:
•Record unscrambled channels by selecting them on this recorder.
•Record scrambled channels by selecting them on the cable box/satellite tuner.
•Watch one channel while recording another.
Important
•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amp/receiver.
A/V |
|
|
IN 1 |
|
|
TV | VHF/UHF |
|
| IN |
|
2 | 1 |
|
VHF/UHF |
| |
| VHF/UHF | |
| OUT | |
|
| IN |
Cable box/ | A/V | |
Satellite receiver | ||
OUT | ||
|
31
| COMPONENT VIDEO OUT |
|
|
|
|
|
|
| |||
| Y | PB |
| PR | VIDEO OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| IN |
|
|
|
|
|
|
|
|
|
|
| ANTENNA |
AC IN | DIGITAL | R | AUDIO | L | R | AUDIO | L | VIDEO | OUT | ||
OUT |
|
|
| OUTPUT |
|
|
| INPUT 1 |
|
| |
1
Antenna/cable TV wall outlet
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2Connect the AUDIO and VIDEO OUTPUT jacks on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied).
This enables you to watch the output from this recorder.
3Connect the audio/video output of your cable box/satellite tuner to the INPUT 1 jacks on this recorder using a set of A/V cables.
This enables you to record scrambled TV channels.
Note
The diagram shows standard video connections, but you can alternatively use the
12
En