Connecting up | 02 |
Connecting to a cable box or satellite receiver (2)
If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.
Using the setup on this page you can:
• Record any channel by selecting it on the cable box/satellite tuner.
Important
•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amp/receiver.
| VHF/UHF |
| IN |
TV | A/V |
| IN 1 |
1
2
| COMPONENT VIDEO OUT |
|
|
|
|
|
| |||
| Y | PB |
| PR | VIDEO OUT |
|
|
|
|
|
AC IN | DIGITAL | R | AUDIO | L | R | AUDIO | L | VIDEO | ||
OUT |
|
|
| OUTPUT |
|
|
| INPUT 1 |
| |
3
A/V
OUT
IN |
ANTENNA |
OUT |
1
VHF/UHF
OUT
Cable box/ |
| VHF/UHF |
Satellite receiver |
| IN |
|
1
Antenna/cable TV wall outlet
1Connect the RF antenna cables as shown. This enables you to watch and record TV channels.
2Connect the AUDIO and VIDEO OUTPUT jacks on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied).
This enables you to watch discs.
3Connect the audio/video output of your cable box/satellite tuner to the INPUT 1 jacks on this recorder using a set of A/V cables.
This enables you to record scrambled TV channels.
Note
•The setup on this page does not allow you to watch one channel and record another.
•The diagram shows standard video connections, but you can alternatively use the
13
En