4.2Back View and Ports
8)Audio Output
connector for analog audio output, uses a Modex 70553 connector Select the appropriate cable from the following chart:
Pin | Name | Function |
1 | L | Left channel audio output |
2 | G | Ground |
3 | G | Ground |
4 | R | Right channel audio output |
9)Device Configuration Jumper
Turn OFF the unit then set this jumper switch to select the drive use mode supporting the computer (jumpered = ON; no jumper = OFF)
Pin | Name | Function | |
1 | MA* | on | Drive set to Master mode |
2 | SL | on | Drive set to Slave mode |
3 | CS | on | Drive set to Cable Select mode |
4 |
| Reserved | |
5 |
| Reserved |
*Pin #1 is active when shipped from the factory.
10)Host IDE Interface
11)DC Input
power supply input for DC +5 V and +12 V
Pin | Name | Function |
1 | +12 | Power supply input for DC +12 V |
2 | G | Ground |
3 | G | Ground |
4 | +5 | Power supply input for DC +5 V |
- 7 -