Pioneer DVR-3100 operating instructions Auto Channel Setting Download from TV, Manual CH Setting

12The Initial Setup menu

Auto Channel Setting : Download from TV

If you connected this recorder to your TV using the AV1(RGB)-TVAV connector, and if your TV supports this function, you can download all the channels that your TV is tuned to. Check your TV’s instruction manual for more details.

1 Choose ‘Download from TV’.

Initial Setup
Basic	Auto Channel Setting	Auto Scan
Tuner	Manual CH Setting	Download from TV
Video In/Out	Channel Swapping
Audio In	ShowView CH Setting
Audio Out
Language
Recording
Playback

2 Select your country.

Initial Setup
Basic	AuttoChannelAutolSettiChannelg Setting
Tuner	Manual CH Setting	Austria
Video In/Out	Country
	Channel Swapping
Audio In	ShowView CH Setting
Audio Out
Language
Recording
Playback

3 Press ENTER to start downloading.

Downloading	Pr 5
	Cancel

After downloading has finished, the channel mapping screen appears showing which channels have been assigned to which program numbers.

Tip

•If the channel tuning information is updated in the TV, the recorder will automatically download the new information.

78

Manual CH Setting

The channel skip function lets you skip channels where there is no station so that as you change channels using the CHANNEL +/– buttons, number buttons or the front panel SMART JOG, you only change to channels that have a station.

The manual tuning function allows you to manually tune to stations, should you need to.

1 Select ‘Manual CH Setting’, then ‘Next Screen’.

Initial Setup
Basic	Auto Channel Setting	Next Screen
Tuner	Manual CH Setting
Video In/Out	Channel Swapping
Audio In	ShowView CH Setting
Audio Out
Language
Recording
Playback

Press ENTER to go to the country setting screen.

2 Select your country.

Initial Setup
Basic	Auto ChannelManualSettingChannel Setting
Tuner	Manual ChannelHSettingSetting	Austria
Video In/Out	Country
	Channel Swapping
Audio In	ShowView CH Setting
Audio Out
Language
Recording
Playback

3Press ENTER to go to the manual channel setting screen.

	Pr 1
Skip	Off
CH System	Western Euro
Channel	2
AFT	On
Level
Sound System	B/G
Name
Decoder	Off

•Use the CHANNEL +/– buttons, number buttons or the SMART JOG on the front panel to change channels.

From this screen there are eight parameters you can set:

•Skip – If you want to skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.

•CH System – Set the channel system used in your area or region.

•Channel – Change the channel number assigned to the current preset.

•AFT (Auto Fine Tune) – When set to On, the station is automatically tuned; set to Off to manually fine tune (see below).

•Level – Set the AFT level (see above).

En