Language settings, DTS Out, 96kHz PCM Out

The Initial Setup menu

If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital PCM. Check the manual that came with the connected component if you’re unsure whether it is Dolby Digital compatible.

DTS Out

You only need to make this setting if you connected this recorder to an AV amplifier (or other component) using the digital output.

• Default setting: On

Initial Setup
Basic	Digital Out	On
Tuner	Dolby Digital Out	Off
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV receiver (or other connected component) has a built-in DTS decoder, set to On, otherwise set to Off. Check the manual that came with the connected component if you’re unsure whether it is DTS compatible.

Important

•If you set to On with a non-DTS compatible amplifier, noise will be output when you play a DTS disc.

•When set to On, there is no analog audio output when playing a DTS DVD-Video disc.

•When playing a DTS audio CD (even when DTS Out is Off), noise is output from the analog outputs. Do not play this through your amplifier and speakers.

•When playing a DTS audio CD, make sure that Stereo is selected using the AUDIO button. See Switching DVD soundtracks on page 43.

96kHz PCM Out

You only need to make this setting if you connected this recorder to an AV amplifier (or other component) using the digital output.

• Default setting: 96kHz		48kHz
Initial Setup
Basic	Digital Out	96kHz 48kHz
Tuner	Dolby Digital Out	96kHz
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV receiver (or other connected component) is compatible with high sampling rate audio (88.2 / 96 kHz), set to 96kHz, otherwise set to 96kHz 48kHz. Check the manual that came with the connected component if you’re unsure whether it is compatible with high sampling rate audio.

MPEG Out

You only need to make this setting if you connected this recorder to an AV amplifier (or other component) using the digital output.

• Default setting: MPEG		PCM
Initial Setup
Basic	Digital Out	MPEG
Tuner	Dolby Digital Out	MPEG PCM
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV receiver (or other connected component) is MPEG audio compatible, set to MPEG, otherwise set to MPEG PCM. Check the manual that came with the connected component if you’re unsure whether it is MPEG compatible.